Have you ever tried to reset garbage disposal only to realize that it was too late? The blades had already started spinning and you didn’t even notice until it was too late. If you’ve ever experienced this problem, then you know how frustrating it can be. Fortunately, there is a way to fix this issue without having to call a plumber or pay someone else to come over.
Garbage disposals are often installed under sinks in kitchens. They are designed to grind food waste down into smaller pieces that can easily pass through pipes and drain systems. Unfortunately, they can also become clogged due to buildup of food particles. This causes them to stop working properly, resulting in noxious odors and possible damage to plumbing fixtures.
To prevent this from happening, you should regularly clean out the inside of your sink. This will ensure that your garbage disposal stays running smoothly. To do this, simply turn off the water supply to your sink, remove the stopper, and pour hot water down the drain. Let the water run for at least 30 seconds before turning the faucet back on. Doing this will flush away debris that has accumulated in the bottom of your sink.
What You’ll Need
• Plunger
• Water
• Drain cleaner
• Cleaning brush
Step 1: Turn Off the Water Supply
Turn off the main water valve located near the top of the sink. Open up the faucet handle so that the water flows freely.
Step 2: Remove the Stopper
Turn off the power switch by lifting the cover plate located just above the sink’s countertop. Pull the plug out of the wall socket.
Step 3: Pour Hot Water Down Your Sink
Pour about half an inch of hot water down the drain pipe. Wait for the water to flow completely clear before continuing with step 4.
Step 4: Use a Brush to Clean Out the Inside of the Sink
Use a cleaning brush to scrub any debris that may have collected in the bottom of your drain. Make sure to use enough pressure when brushing to dislodge any blockages.
Step 5: Reinstall the Cover Plate
Replace the cover plate and reattach the power cord. Plug the power cord back into the wall outlet.
Step 6: Test the Functionality of the Disposal
Once you’re done cleaning out your sink, test the functionality of the disposal by placing a small amount of solid material (like vegetable peel) into its opening. If the disposal works as expected, it should grind the object into small pieces within a few minutes.
Tips & Warnings
If you don’t see anything coming out of the disposal after a minute, try pouring more hot water down the drain instead.
If you still aren’t seeing anything come out of the disposal after several minutes, contact a professional service provider who specializes in repairing garbage disposals.
Ensure the Disposal Is Off
Before performing steps 1-6, make sure the disposal is turned off. Otherwise, you could end up damaging your sink.
This method won’t work if the disposal is not plugged in. In this case, you need to hire a professional service provider to help you install a new one.
Check for Obstructions
Make sure there isn’t any foreign objects lodged in the disposal. If you find something stuck inside, please call a professional service provider immediately.
The best way to get rid of a clog is to let the water flow until it clears. However, if you’re unable to open the drain, you can use a plunger to break the obstruction loose.
Garbage disposals are usually installed under kitchen sinks. These devices are designed to reduce the mess associated with food waste. They also provide a convenient means of getting rid of trash such as paper towels, diapers, and other items that would otherwise be difficult to dispose of.
Garbage disposals are typically made of metal or plastic. The parts of these appliances include a motor, blades, and a grinding mechanism.
When installing a garbage disposal, make sure to follow the manufacturer’s instructions carefully. Failure to do so could result in damage to your appliance.
Locate the Reset Button
To reset the garbage disposal, locate the button on the side of the device. You’ll find it near the top right corner of the unit. Pressing the button will turn the machine off. To turn the device back on again, press the same button.
Resetting garbage disposal is necessary every once in a while to ensure proper operation. This process helps prevent the buildup of gunk in the disposal.
In addition to clearing away gunk, the resetting process also resets the timer. When the timer expires, the device automatically turns itself off.
Push the Reset Button
To perform the reset procedure, push the reset button located at the top right corner of your garbage disposal.
Press the button firmly but gently. It should take about 30 seconds for the device to shut off.
After the device shuts off, wait 10 minutes before using it again.
Test the Disposal
Once the garbage disposal has been reset, test its functionality of it by putting some solid material like vegetables into the opening. If everything goes well, you shouldn’t have any problems.
However, if the garbage disposal doesn’t seem to be working properly, it may be time to replace it. If you notice any unusual sounds coming from the garbage disposal, don’t hesitate to contact a professional service provider.
Dislodge Jams and Retest
If the garbage disposal still does not seem to be functioning correctly after the reset, try dislodging the jam manually.
Use a pair of pliers to grasp the object that is jammed in the disposal. Pull the object out slowly. Then retest the disposal. If the problem persists, consider replacing the disposal.
Conclusion
The garbage disposal is an important part of your kitchen. A good one will help keep your sink free of debris and help you save money on cleaning products.
Garbage disposal should last for years without requiring maintenance. However, if you notice any signs of wear and tear, it might be time to get a new one.
